Water based laminating adhesive

Water based laminating adhesive is a method to improve the surface gloss, strength and aesthetic effect of printed matter by processing the surface of printed matter. To measure the quality of film mulching, we also need to examine its brightness, strength, adhesion and so on. Water based wet lamination is favored by customers because of its high strength, easy recovery and no pollution.

Performance and application:

Compared with the traditional glue, the water-based laminating adhesive is made of imported raw materials. It has the advantages of high solid content, low viscosity, good process applicability, strong adhesion and non-toxic. It is suitable for aluminum foil (OPA), pretreated polyethylene (HDPE, LDPE), polypropylene (OPP, CPP), polyester (PET), polyamide (PA, ony) films and metal spraying films, Two component solvent based polyurethane adhesive compounded between cellophane and glass paper.

It can enhance the brightness of the printed matter, increase the light resistance of the printing ink, increase the heat and moisture resistance of the ink layer, protect the imprint and beautify the product.

And the water-based laminating adhesive has environmental protection and pollution-free, which makes the waterproof high-quality performance widely trusted by consumers.

Characteristics: compared with traditional oil-based adhesive

1. With excellent coating performance, it can replace the existing solvent laminating adhesive in dry laminating machine. It can save 20 ~ 30% cost; About 50% of the cost can be saved for gold and silver cards.

2. Excellent gloss and transparency, aging and yellowing resistance. It has good post-processing performance, can be pressed fine lines, bronzing, silver, UV and so on.

3. Environmental protection and green products can be safely used in the processing of food, medicine, tobacco and alcohol, children's toys and other packaging materials.

4. After use, the machines and tools are cleaned with clean water to improve the production environment, completely eliminate the electrostatic fire accident in the coating process of oily products, and ensure the health of production personnel. It can be used on the original oil machine.

5. Good temperature resistance, no blistering at 60 ℃ or - 18 ℃ for 120h.

purpose

1: It is suitable for laminating high-grade hand bags and high-grade color boxes.

2: It is suitable for laminating BOPP film / printed matter, pet laser film and paper products.

usage method:

1. This product has been adjusted according to the requirements of the laminating process, do not add water and other solvents when using.

2. After coating, the recommended drying and pressing temperature is 70-80 ℃, which can be adjusted according to the film covering speed and product requirements.

matters needing attention:

1. Store in a cool place, avoid direct sunlight, storage temperature is 5-40 ℃, should pay attention to antifreeze, below 0 ℃ for a long time storage will damage the product performance.

2. Please do not mix with other products. The unused products should be sealed.